The Acrylic Clear Falls Weir can be used in many internal and external locations. This Weir is made Acrylic and has a sealed cover on the top (additional support will still be required if heavy materials or construction is above the blade). Available in many widths, the Clear Falls have one, two or three water inlets depending on blade width. The blade has to be installed level to create an even flow of water across the width of the blade. The flow of water reduces as the height of the water blade is increased – ensure the pump used has the right capacity for the desired height of the Acrylic descent. The Clear Falls descents have a Bottom entry inlet for the water – the pipework has to connect to the water blade from the pump situated in the reservoir. The reservoir should be on a firm base with sufficient support around the sides and edges. LED light strips added to the Clear Falls give a stunning effect as the water comes over the blade. The light strip has 10 metre of cable and clips into the back of the feature.