Previous page Next page 1 Clear Visibility 2 Tougher Construction 3 High Impact Strength LBRST Headlight Assembly Fitment: For Ford For Ranger Base Cab & Chassis 2-D 10-11For Ford For Ranger Base Standard Cab Pickup 2-D 08For Ford For Ranger XLT Extended Cab Pickup 2-D 01-11For Ford For Ranger XLT Standard Cab Pickup 2-D 01-11Note: Bulbs are not Included, Please Be Aware. No Installation Guide Included. Professional Installation Is Highly Recommended. The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked. Specification Light Source: Halogen/Led Position: Front Outside Package: A Pair(Right&Left) Color: Black Housing Amber Reflector Clear Lens OE Number: 6L5Z13008AA,6L5Z13008BA,6L5Z-15A201AA,6L5Z-15A201BAA Bulb Type: High /Low Beam:9007 Signal Light:3457A Causes And Solutions Of Fogging Headlight Installation Steps Open the hood 1.Open the hood. 2.Twist and extract headlamp mounting pin. Disconnect wire harness 1.Disconnect wire harness and remove headlamp. 2.Remove all bulbs socket from old headlamp. (Twist sockets counter clockwise) Insert all bulbs 1.Insert turn signal etc. sockets into the new headlamp. 2.Insert all bulbs and connect headlights wires to the new headlamp(All twist clockwise) lock headlamp mounting pin 1.Insert and lock headlamp mounting pin to secure upper and lower headlamps. 2.Repeat above steps on the other side. What Need to Do Before Use? Please check if the a pair (right&left) is intact and bulb sockets are tightly secured with the rubber cap and rubber seal. Does the Bulb Include? Please note that the bulb is not included in the set, the original bulb can be used, and the matching bulb model has been given in the product description. How to Adjust The Lights? There will be a button to adjust the height of the light on the back of each headlight. you only need to use a suitable adjustment tool to gently rotate it to adjust, And please note that donot over-adjust and do not blind other drivers. What If It Won't Be Installed? It is recommended to find a professional to make adjustments. If you want to try, please check related videos and instructions before adjusting. And please note that donot over-adjust