Shipped well and arrived with all pieces in tact. Manufactured well, and sturdy. You get a nice quality fixture for a bargain price.When it came to installation, however, I discovered two limitations during the process, or flaws in some of the parts that may be helpful to know ahead of time.1. The mounting bracket screws didn’t fit the screw holes of my electric junction box, so I had to use another set of screws. Not really a big deal.2. The mounting bracket has a threaded bolt that faces out from the junction box to where the light fixture’s base bracket attaches to it and as a result becomes flush with the wall. Finally, there is hex cap nut that threads on to the bolt to secure everything together. However, when I screwed down the hex cap nut as far as it would thread down, there was still considerable room between the cap nut and the bracket. In other words, the mounting bolt was too long for the cap nut, or the junction box would have needed to be moved back a few inches. Since I didn’t want to increase my scope of work, I improvised and used a rubber bushing as a locking washer to secure it all on. This was not provided and required a trip to the hardware store. Lastly, you want to make sure to use a silicon caulking to seal the gap between the fixture bracket and the wall to ensure against water getting in thru the back and into the junction box and wiring.